Call 08048603198 72% Response Rate

Send Enquiry

our range

Expansion Joints

Manufacturer of a wide range of products which include slab seal expansion joint for bridge, elastomeric bearing for bridge, strip seal expansion joint, slab seal expansion joint, rubber expansion joints and compression seal expansion joint.

Slab Seal Expansion Joint For Bridge

  • Slab Seal Expansion Joint For Bridge
  • Slab Seal Expansion Joint For Bridge
  • Slab Seal Expansion Joint For Bridge
Slab Seal Expansion Joint For Bridge
Get Best Quote
Rs 1,800  / MeterPrice on Request

Product Brochure

MaterialMild Steel
Size3/4 inch
ColorWhite
Usage/ApplicationStructure Pipe
Country of OriginMade in India
We are engaged in offering  Slab Seal Expansion Joint For Bridge    product to our clients. Our range of this products is widely appreciated by our clients

View Complete details

Yes! I am Interested Request a call back

Elastomeric Bearing For Bridge

  • Elastomeric Bearing For Bridge
  • Elastomeric Bearing For Bridge
  • Elastomeric Bearing For Bridge
Elastomeric Bearing For Bridge
Get Best Quote
Rs 1,800  / PiecePrice on Request

Product Brochure

MaterialNatural Rubber
Usage/ApplicationBridge
Compression Set Temperature24 hours @100 centigrade
Elongation At Break425%
Hardness60 +-
Tensile Strength17 MPa
Tolerance-2 to +4 mm
ShapeSquare
Elastomeric Bridge Bearing Pads are much easier to install in bridge than compared to other types of bearing used and required nil maintenance unlike most another elastomer, rubber undergoes no marked stiffening at low temperature when the thermal contraction of the bridge deck is at the maximum such stiffening could be deleterious to bearing and/or structure.

View Complete details

Yes! I am Interested Request a call back

Strip Seal Expansion Joint

  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
Strip Seal Expansion Joint
Get Best Quote
Rs 4,200  / PiecePrice on Request

Product Brochure

MaterialMild Steel
Size3 inch
Usage/ApplicationBridge
BrandNEC
Thread SizeF TYPE Monolithic Section
Expansion Joint TypeStrip Seal (M TYPE & F TYPE)
System Width300 mm

With sincerity and hard work of our professionals, we have carved a niche for ourselves in this domain by providing a premium quality gamut of Bridge Strip Seal Expansion Joint.

The technically advanced and dependable Expansion Joint Systems offered by us meet the demands of our most discerning clients. Our team of qualified engineers and architects makes use of advanced and sophisticated software to design the blueprints for all projects. Their designing skills enable us to reconstruct and build various buildings, which include residential and commercial structures. Further, our prolong expertise lead us to offer our clients with superior Armour Polyethylene Foam Sheets Backup Rods.We make use of quality material in the construction process, which is procured from trusted vendors.

View Complete details

Yes! I am Interested Request a call back

Slab Seal Expansion Joint

  • Slab Seal Expansion Joint
  • Slab Seal Expansion Joint
  • Slab Seal Expansion Joint
Slab Seal Expansion Joint
Get Best Quote
Rs 2,000  / MeterPrice on Request

Product Brochure

MaterialMild Steel
Brandyasraj
ColorBlack
Usage/Applicationbridge
Surface FinishingPolished
Expansion Joint TypeSlab Seal Expansion Joint
We are engaged in offering Slab Seal Expansion Joint to our clients. Our range of all products is widely appreciated by our clients.

View Complete details

Yes! I am Interested Request a call back

Strip Seal Expansion Joint

  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
Strip Seal Expansion Joint
Get Best Quote
Rs 3,900  / MeterPrice on Request

Minimum Order Quantity: 1 Meter

Product Brochure

MaterialSteel & Neoprene Rubber
SizeAs per drawing specifications
Usage/ApplicationBridge, Railway, Highway
ColorSilver
BrandAmeenji
Model Name/NumberAmeenji
Surface FinishingGalvanized
Surface TreatmentGalvanized
Working Temperature-20 to 80 deg C
Single Joint WeightAs per drawing specifications
Expansion Joint TypeF-Type, M-Type, and Triangle type
Is this PortableNo
Product Code72161000
Product TypeF-Type, M-Type, and Triangle type
Packaging TypeAs per Standard ARPL packing
Country of OriginMade in India
Movement SizeUpto 80 mm
StandardIRC 83 SP 69
Lengthany
Strip Seal Expansion Joint are the most frequently employed types of expansion joints in road bridges. By special steel welding elements arranged side by side and equally controlled they are supported on special load carrying and control systems, intermediate sealing elements with form- and force-fit clamping as well as marked by a continuous anchorage in the structure with permanent connection to seal and coating.

Single strip expansion joint consist of two edge beams with anchorage and with elastomeric sealing element held firmly in the housing of edge beams that guarantee the water tightness the joint. The maximum gap between the edge beams at the road surface when the joint fully opens due to maximum contractions of the deck shall be limited to 80mm for comfortable passage of traffic. The edge beams protects the adjacent bridge deck concrete from damage due to vehicular impact and also transfer the vehicular loads to the deck structures through robust anchorage system.


Additional Information:

  • Production Capacity: 5000
  • Delivery Time: as per customer schedule
  • Packaging Details: As per standard ARPL Specifications

View Complete details

Yes! I am Interested Request a call back

Slab Seal Expansion Joint

  • Slab Seal Expansion Joint
  • Slab Seal Expansion Joint
  • Slab Seal Expansion Joint
Slab Seal Expansion Joint
Get Best Quote
Rs 5,400  / MeterPrice on Request

Minimum Order Quantity: 1 Meter

Product Brochure

SizeAs per drawing specifications
Usage/ApplicationBridge
BrandAmeenji
MaterialRubber
ColorBlack
Corrosion ResistanceCoated with anti Corrosive paint
Model Name/NumberAmeenji
ShapeAs per drawing specifications
Surface FinishingGalvanized
Surface TreatmentGalvanized
ThicknessAs per IRC SP 69-2011
Is this PortableNo
Packaging TypeAs per Standard ARPL packing
Country of OriginMade in India
MovementMax 300 mm
LengthMax 6 m
This type of joint consists of reinforced elastomeric pads connected to a supporting steel structure which itself is cast into the concrete structure of the bridge. The joint accommodates movements by width. 

Functions:
  • Should permit the expansion/contraction of the span/spans to which it is fixed with out causing any distress or vibration to the structure
  • Cause no inconvenience/hazard to the road user and offer good riding comfort
  • Should be capable of with standing the traffic loads including dynamic effects
  • Surface exposed to traffic should be skid free and resstant to polishing
  • Ensure accessibility for inspections and easy maintenance with all parts vulnerable to wear being easily replaceable

Movement: 40 to 300 mm

Additional Information:

  • Production Capacity: 50 meters
  • Delivery Time: 8 days
  • Packaging Details: Standard ARPL packing

View Complete details

Yes! I am Interested Request a call back

Strip Seal Expansion Joint

Strip Seal Expansion Joint
Get Best Quote
Rs 3,900  / MeterPrice on Request

Minimum Order Quantity: 1 Meter

Product Brochure

MaterialNeoprene Rubber
SizeAs per drawing specifications
BrandAmeenji
ShapeRectangular
Hardness80 Shore A
Usage/ApplicationBridges
LengthAs per drawing specifications
Joint Width4 inch

Single Strip seal elastomeric joint (Movement up to 80mm). Single strip expansion joint consist of two edge beams with anchorages and with elastomeric sealing element held firmly in the housing of edge beams that guarantee the water tightness the joint. The maximum gap between the edge beams at the road surface when the joint fully opens due to maximum contractions of the deck shall be limited to 80mm for comfortable passage of traffic. The edge beams protects the adjacent bridge deck concrete from damage due to vehicular impact and also transfer the vehicular loads to the deck structures through robust anchorage system. Typical single strip seal joint is shown in the figure below.

Reinforced Elastomeric Slab Seal Expansion Joints (Movement up to 40mm to 330mm)

This type of joint consists of reinforced elastomeric pads connected to a supporting steel structure which itself is cast into the concrete structure of the bridge. The joint accommodates movements by width. Typical reinforced elastomeric joint is shown in the figure below.

Functions of Elastomeric Joints
  • Should permit the expansion/contraction of the span/spans to which it is fixed with out causing any distress or vibration to the structure, Cause no inconvenience/hazard to the road user and offer good riding comfort, Should be capable of with standing the traffic loads including dynamic effects, Surface exposed to traffic should be skid free and resstant to polishing, Ensure accessibility for inspections and easy maintenance with all parts vulnerable to wear being easily replaceable


Additional Information:

  • Production Capacity: 100 Meters
  • Delivery Time: 8 days
  • Packaging Details: Standard ARPL packing

View Complete details

Yes! I am Interested Request a call back

Rubber Expansion Joints

  • Rubber Expansion Joints
  • Rubber Expansion Joints
  • Rubber Expansion Joints
Rubber Expansion Joints
Get Best Quote
Rs 1,800  / PiecePrice on Request

Product Brochure

ColorBlack
MaterialStainless Steel
Usage/ApplicationIndustrial
BrandSai Rubber
ShapeRectangular
Length42 mm
Joint width127 mm
Hardness80 Shore A
Rubber expansion joint is a flexible connector fabricated of natural and/or synthetic elastomers and fabric, if necessary, internal metallic reinforcements designed to provide stress relief in piping systems due to thermal movements and mechanical vibration.

View Complete details

Yes! I am Interested Request a call back

Compression Seal Expansion Joint

Compression Seal Expansion Joint
Get Best Quote
Rs 3,800  / MeterPrice on Request

Minimum Order Quantity: 1 Meter

Product Brochure

Thickness2mm
Usage/ApplicationBridge
ColorBlack
Corrosion ResistanceCoated with anti Corrosive paint
Model Name/NumberAmeenji
Working Temperature-20 to 80 deg C
Is this PortableYes
Packaging TypeAs per Standard ARPL packing
Hardness60 Shore A
Size/DimensionAs per drawing specifications
Country of OriginMade in India
MaterialRubber
Length6 m
Bridge expansion joints are what allow the concrete to naturally expand and contract without cracking. The rubber expansion joints are placed at the end of a bridge where it meets up with the freeway. These connectors give the concrete just enough space to move and avoid concrete cracks.Bridges made of concrete will expand and contract a bit for many different reasons. That includes ice, settlement, shrinkage of the concrete, temperature changes, and even the weight of vehicles.

Additional Information:

  • Production Capacity: 50
  • Delivery Time: 8 days
  • Packaging Details: As per standard ARPL packing

View Complete details

Yes! I am Interested Request a call back

Bridge Expansion Joint

Bridge Expansion Joint
Get Best Quote
Rs 3,900  / MeterPrice on Request

Minimum Order Quantity: 40 Meter

Product Brochure

Materialmild steel anchorage with rubber strip
SizeAs per drawing specifications
BrandAmeenji
Usage/ApplicationBridge
Surface FinishGalvanised
Operating Temperature70 c
ColorSilver
Corrosion ResistanceCoated with anti Corrosive paint
Model Name/NumberAmeenji
ShapeAs per drawing specifications
Surface FinishingGalvanized
Surface TreatmentGalvanized
ThicknessAs per IRC SP 69-2011
Expansion Joint TypeF-Type, M-Type, and Triangle type
Is this PortableNo
Product Code72161000
Range Of Width Provided40mm to 80mm
Product TypeF-Type, M-Type, and Triangle type
Packaging TypeAs per Standard ARPL packing
Joint TypeF-Type, M-Type, and Triangle type
Load CapacityAs per bridge specifications
Operative Movements40mm to 80mm
Tensile StrengthMinimum 11 Mpa
Country of OriginMade in India
Hardness60 Shore A

Single Strip seal elastomeric joint (Movement up to 80mm). Single strip expansion joint consist of two edge beams with anchorages and with elastomeric sealing element held firmly in the housing of edge beams that guarantee the water tightness the joint. The maximum gap between the edge beams at the road surface when the joint fully opens due to maximum contractions of the deck shall be limited to 80mm for comfortable passage of traffic. The edge beams protects the adjacent bridge deck concrete from damage due to vehicular impact and also transfer the vehicular loads to the deck structures through robust anchorage system



Additional Information:

  • Production Capacity: 5000
  • Delivery Time: as per customer schedule
  • Packaging Details: As per Standard ARPL packing

View Complete details

Yes! I am Interested Request a call back

Bridge Expansion Joints

Bridge Expansion Joints
Get Best Quote
Rs 4,200  / MeterPrice on Request

Minimum Order Quantity: 1 Meter

Product Brochure

MaterialMild Steel & Chloroprene rubber
Usage/ApplicationConstruction
Surface FinishGalvanised
BrandAmeenji
Operating Temperature70 c
ColorBlack
Corrosion ResistanceCoated with anti Corrosive paint
Model Name/NumberAmeenji
ShapeAs per drawing
Surface FinishingGalvanized
Surface TreatmentGalvanized
ThicknessAs per IRC SP 69-2011
Expansion Joint TypeF-Type, M-Type, and Triangle type
Is this PortableNo
Product Code72161000
Range Of Width Provided40mm to 80mm
Product TypeF-Type, M-Type, and Triangle type
Joint TypeF-Type, M-Type, and Triangle type
Load CapacityAs per bridge specifications
Operative Movements40mm to 80mm
Tensile StrengthMinimum 11 Mpa
Country of OriginMade in India
We are engaged in manufacturing superior quality Compression Seal Expansion Joint.Ameenji Rubber Private Limited is a leading manufacturer and exporter of Expansion Joints, Rubber Sheet, Bearing Pads, Pot Bearings, etc. The company has an experience of three decades, employee strength of more than 200, is equipped with state-of-the-art manufacturing machinery and material testing laboratory; and a 40,000 sq. ft. plant and headquarters in Hyderabad, Telangana. 

Additional Information:

  • Item Code: 72161000
  • Production Capacity: 500 Meters
  • Delivery Time: 8 days
  • Packaging Details: Standard ARPL Packing

View Complete details

Yes! I am Interested Request a call back

Metallic Expansion Joints

  • Metallic Expansion Joints
  • Metallic Expansion Joints
Metallic Expansion Joints
Get Best Quote
Rs 3,900  / PiecePrice on Request

Product Brochure

MaterialStainless Steel
Size3 inch
Usage/ApplicationPneumatic Connections
ColorSilver
ConnectionFlange End
Packaging TypeBox
Head ShapeRound
Metal expansion joints (also called compensators) are compensating elements for thermal expansion and relative movement in pipelines, containers and machines. They consist of one or more metal bellows, connectors at both ends, and tie rods that depend on the application.

View Complete details

Yes! I am Interested Request a call back

EXPLORE MORE CATEGORIES